AMERICANA® MULTI-SURFACE SATIN™
SKU:
$1.99
$1.99
Unavailable
per item
Use this premium, satin, indoor/outdoor acrylic on almost any surface including most plastics. They are self-sealing, so no primer or varnish is required and they offer excellent coverage in one to two coats. This special formula is designed to brush out smoothly and once fully cured, creates a durable, hard finish that is highly resistant to cleaning chemicals.
- Superior flow and leveling
- Acid-free
- Intermixable colors
- Permanent, lightfast pigments
- Soap and water clean-up
- Water-based and non-toxic
- Made in the USA
How to Use Multi-Surface
Shake well. Clean surface thoroughly then apply 1-2 coats with a brush or sponge. Air cure 7 days. For a top-rack, dishwasher-safe finish on oven-safe surfaces, place finished piece in cool oven, set temperature to 325°F, bake for 30 minutes, then cool with oven door partially open. Not for direct contact with food. Suitable for indoor or outdoor use. Cleans up with soap and water.
Tips for Multi-Surface
Clean stencils quickly before paint dries for easier re-use.
No primer or sealer is needed before painting or to protect the finish afterwards.
Get a nice, even finish on slick surfaces like glass and metal by using a soft brush to spread out Multi-Surface paint, then leaving it to self-level.
Use a light touch on slick surfaces for better coverage. Pressing too firmly with the brush can cause paint to slide off the surface.
For an eggshell finish, use a high-density cosmetic sponge to tap the paint onto the surface. This technique will also give your basecoat "tooth" that makes it easier for additional coats of paint or painted designs to adhere.
Shake well. Clean surface thoroughly then apply 1-2 coats with a brush or sponge. Air cure 7 days. For a top-rack, dishwasher-safe finish on oven-safe surfaces, place finished piece in cool oven, set temperature to 325°F, bake for 30 minutes, then cool with oven door partially open. Not for direct contact with food. Suitable for indoor or outdoor use. Cleans up with soap and water.
Tips for Multi-Surface
Clean stencils quickly before paint dries for easier re-use.
No primer or sealer is needed before painting or to protect the finish afterwards.
Get a nice, even finish on slick surfaces like glass and metal by using a soft brush to spread out Multi-Surface paint, then leaving it to self-level.
Use a light touch on slick surfaces for better coverage. Pressing too firmly with the brush can cause paint to slide off the surface.
For an eggshell finish, use a high-density cosmetic sponge to tap the paint onto the surface. This technique will also give your basecoat "tooth" that makes it easier for additional coats of paint or painted designs to adhere.